Featured products
SeeFish Ice Fishing Transducer Pole
After the success of our original SeeFish Transducer mount and our SeeFish 2.0 for boat applications. We decided to come out with our very own Ice Fishing Pole. The pole is powder coated aluminum ...
SeeFish Ice Fishing / Boat Transducer Pole Bundle
After the success of our original SeeFish Transducer mount and our SeeFish 2.0 for boat applications. We decided to come out with our very own Ice Fishing Pole. The pole is a powder coated aluminum...
SeeBrakes 2.0
PREORDER ONLY See-Brakes are designed to give live sonar fishermen the ultimate tool in boat control. This is an all-in-one control system that allows you to mount trolling motors on your existing ...
Shallow Water Anchor Straps
These are straps for your Power Poles or Raptors. They help support the extra weight of the trolling motors included in our See-Brakes. This is for a set of two.
SeeBrakes Stomp Switch Wedge
This is a plastic wedge that puts your SeeBrakes stomp switch at a better angle for engagement while seated. Will come with 2 longer screws for mounting. (Stomp switch NOT included)
SeeFish Transducer Mount 2.0
Here is our BRAND NEW arm design for the SeeFish Transducer Mount 2.0
We have come up with an ALL NEW design that allows for many more stowing options than before. We have done extensive testing ...
SeeFish Pole Wire Retaining Clip
NEW AND IMPROVED DESIGN!
These clips are made to house your LiveScope wires on our SeeFish pole without any sharp wear points on them. They come in packs of 3 or sold by themselves. They will clip ...
Pole Extension for SeeFish Transducer Pole
Adds 13" or 25" to the length of the SeeFish Transducer Pole to make the pole about 60"-61" or 72"-73" in total length.
**IF PURCHASING AFTER INITIAL POLE PURCHASE, YOU WILL NEED EXTENSION TAP AND ...
SeeFish Transducer Pole Extension Handle
This is an extension handle for our SeeFish Transducer Pole. Will extend handle from 12" to about 25".
SeeFish Quick Detach Mount
This is our NEW Quick Detach Plate and upright for our SeeFish Transducer Mount 2.0 . Your existing 2.0 arm will mount directly in this. This will allow you to remove the upright piece off of your ...
Angled End for SeeFish Transducer Mount 2.0
This is the angled end replacement if yours breaks. We are offering a full piece plastic if you lose the part that clamps around the pole as well. Just the plastic end cap and now a full machined a...
SeeFish Arm Mount Extension Base
This is a mount for our SeeFish Transducer Mount that will extend the base plate mount from about 7.75" to 13.25" inches in height to get over the rails of those boats with lower decks.
**You will...
Tap and Set Screw Setup
Comes with drill bit, tap and 2 - 1/16th allen set screws to attach pole extension.
Knob
These are the knobs we use for the SeeFish 2.0 mounts. We have two different size options. Both are 1/4-20 threads 1/2" shank.
Aluminum Knob for SeeFish Transducer Arm
This is a replacement knob for our SeeFish Transducer Pole Arm. Solid machined aluminum replacement.
50W TRUEWarm LED Flood Light w/ XD Glass
After tons of research with bowfishing veterans we designed the TRUEWarm line. We fished with nearly every LED light available on the market and with no surprise we came up short. What it took was...
100W TRUEWarm LED Flood Light w/ XD Glass
If you have been wanting the 50W or the 70W lights but not sure if they are bright enough. Then here is the light for you! These lights are BRIGHT! Same size housing as our 80W TRUEWarm lights but ...
70W TRUEWarm LED Flood Light
IN STOCK!
Here is our brand new 70W TRUEWarm Flood Light. We have packed some big things in a very small package with this light. The housing is over 30% smaller than our 50W light and you are ge...
140W TRUEWarm LED Flood Light
Here is our BRAND NEW 140W TRUEWarm Flood Light! This is our flagship light and is also our brightest light in the smallest housing we can use. We are now able to pack 2-70W Chips inside the sam...
PowerMax 12V Converters - Bowfishing Series
PM3-12V Series(Bowfishing Series)
Available in 35, 45, 55, 60, 75, 100, 120 AMP
Battery Chargers UL- CUL Approved
2 Year Warranty
Quiet Fan Cooling
Over Temp Protection
Reverse Polarity Protection
TRUEWarm Light Bracket
NEW TRUEWarm Brackets! These new brackets are now made of 3/16" powder coated steel. They are a MUCH beefier bracket than before. We have also moved the mounting holes more toward the bend in the b...
1W Flush Mount LED Light
These are a 1W accent LED light that has a hood or not. The hood makes it much easier on the eyes. They are a glue in light that can be used as courtesy lights in your boat, RV, truck, UTV, etc. We...
SeeLite Tie-Down Brackets
These are a universal tie down bracket for most any boat application. Work very well in any T style rail. They come with all the hardware to mount. Stainless bolts with SILVER nuts. We sell them in...
TRUEWarm X.D. Glass Replacement
X.D.Glass Replacement Lens for TRUEWarm lights.
210W TRUEWarm LED Flood Light - HPS
This is our BRAND NEW 210W light for all of you HPS guys. We had one purpose for this light and that was to make a TRUE HPS replacement LED flood light. After extensive testing we think this light ...
10" TRUEWarm LED Light Bar
This is one of our BRAND NEW TRUEWarm LED Bars! The 10" light packs a punch for as small as it is. It is a whopping 100W of CREE LEDs. This light is prefect for guys just looking to get out on the ...
Belkin 10-Outlet Metal Surge Master with 15-Foot Cable
This is the surge protector we use on our boats that we have installed the 120vac lights on. Works perfect as a plug and play application.
885 Joules
Impact Resistant Heavy-Duty Metal Case
UL 1449...
SeeLite Wake Lights
Introducing our BRAND NEW wake lights! We have engineered these lights to be ultra slim and extremely bright. They come in two different wattages: 45W and 90W. We make the housing out of 316L marin...
20" TRUEWarm LED Light Bar
This is one of our BRAND NEW TRUEWarm Light Bars. The 20" bar is perfect for anyone who wants to spread out their light bars around their boat. They pack a huge punch for being so sleek. They are 2...
BLUE SEA Fuse Block
Organize and protect circuits with a covered fuse block
Fuse Blocks are an effective method of protection to prevent damage to wiring and possible fire in the event of an over-loaded or short circu...
3" TRUEWarm LED Light
This is one of our BRAND NEW TRUEWarm Bars! The 3" light packs a punch for as small as it is. It is a whopping 40W of CREE LEDS. This light is prefect for guys just looking to get out on the weeken...

























-
Anchor Lights
- THE ULTIMATE WAY TO STAND OUT

-
Anchor Lights
- THE ULTIMATE WAY TO STAND OUT
Subscribe to our newsletter
Promotions, new products and sales. Directly to your inbox.
Use left/right arrows to navigate the slideshow or swipe left/right if using a mobile device