Skip to content
SeeLite Command 8
SeeLite Command 8
SeeLite Command 8
SeeLite Command 8
SeeLite Command 8
SeeLite Command 8
SeeLite Command 8

  • New

SeeLite

SeeLite Command 8

Sale price $224.99

SeeLite Command 8

Take complete control of your boat’s electronics with the SeeLite Command 8 — a clean, customizable 8-gang switching system designed to simplify installation while giving you complete control over your accessories.

Instead of running multiple wires to the dash, the Command 8 uses one small communication cable between the switch panel and control box, keeping wiring behind your console to a minimum and creating an extremely clean installation.

The compact water-sealed switch panel features 8 individually programmable switches. Each switch can be customized for your specific setup, including custom engraving, individual switch colors, and multiple switch functions.

Features

  • 8 Individual Switches

  • Water-Sealed Switch Panel

  • Single-Cable Connection from the switch panel to the control box

  • Remote Control Box keeps high-amperage wiring away from the switch panel

  • 2 × 5-Amp Circuits

  • 2 × 10-Amp Circuits

  • 2 × 20-Amp Circuits

  • 2 × 30-Amp Circuits

  • Individual Switch Color Selection

  • Each switch can be programmed as:

    • On / Off

    • Momentary

    • Strobe

    • SOS

Clean. Simple. Custom.

Whether you're controlling lighting, pumps, electronics, or other 12V accessories, the SeeLite Command 8 gives you a powerful, customizable control system built for the marine environment.

Switch Customization & Programming

The SeeLite Command 8 gives you full control over the appearance and function of every individual switch — directly from the panel with no app or additional controller required.

Changing Switch Colors
To change the color of an individual switch, press and hold the main ON/OFF button, then press the switch you want to customize. Each press will cycle that switch through the available color options. Repeat for each switch until your panel is set up exactly how you want it.

Changing Switch Functions
To change switch functions, double-click the main ON/OFF button. All eight switches will begin blinking red, indicating the panel is in function programming mode. Press each individual switch to cycle through the available functions:

  • Red — Standard Toggle: Press once for ON and again for OFF
  • Blue — Momentary: Active only while the switch is being pressed
  • Green — Strobe: Activates the strobe function
  • Purple — SOS: Activates the SOS flashing pattern

Custom engraving, individual switch colors, and individually programmable functions make every Command 8 setup your own. (if some labels are the same as standard then don't put anything in that box and we will send the standard for that)

Standard Labels for the switches are: SPOT, NAV, INT, EXT, WAKE, HATCH, BILGE, REAR.